10mm Aluminium Retro-Fit Corner Protector (Self Adhesive) - Bright Silver - Genesis

10mm Aluminium Retro-Fit Corner Protector (Self Adhesive) - Bright Silver - Genesis

Genesis edge protection profiles are designed to absorb and protect against impact damage on external corners on walls. Suitable for retro fixing the profiles provide a decorative and clean finish as well as covering existing damage to walls so the wall covering doesn't have to be replaced.

Installation Instructions

1. Ensure that the surface where the EAA profile is being applied is smooth, dry and free from any contaminants such as loose paint, dust and grease. 
2. Apply a bead of proprietary cartridge adhesive to the back of both wings on the inside of the profile. 
3. Carefully place the EAA profile into position and apply an even pressure over the entire surface of the profile until a satisfactory lie is achieved. 
4. Once the adhesive has set, remove the protective film from the surface of the profile. 

       NB The operating temperature for the self adhesive tape os -40ºC to 150ºC