WarmUp StickyMat electronic underfloor heating features an ultra-thin 1.8mm wire that does not raise the floor levels. WarmUp StickyMat under tile heating system consists of a pre-spaced heating wire readily attached to an adhesive mesh that can simply be rolled out over the floor before tiling. WarmUp StickyMat system consists of heat conductive wire taped to a glass fibre mesh with pressure-sensitive adhesive. StickyMat can reduce installation time of underfloor heating by 35%.

WarmUp StickyMat is available in two power/heat output levels, 150w/m2 and 200w/m2.

150W/ m2 – power variant can provide primary heating in well-insulated areas. Insulation boards retain heat in the room for longer. More importantly, they prevent downward heat-loss. The 150W/ m2 StickyMat can be laid on both timber and concrete subfloors.

200W/ m2 – power variant is best suited for rooms or areas with a high heat-loss such as conservatories. Be sure to carry out a heat-loss calculation to assess the heating requirements of the room. This is especially the case if you are considering using underfloor heating as a primary heat-source under tiles in a high heat-loss area.

WarmUp StickyMat System is ideal for installations within regularly shaped areas, where 0.5m wide mats can be quickly rolled out across the floor in parallel runs. Warmup StickyMat is available in 150w/m2 and 200w/m2 in sizes ranging from 1m2 to 15m2.