Abacus Raised Tileable Tray Concept Kit 3 - 1850 x 900 x 40/50mm

The Concept 3 Raised Tileable Tray Kit from Abacus is designed for use where you cannot or choose not to site the drain within the floor.

The concept raised tileable shower system can be cut to size* and is designed for two main use cases. One where a distinctive shower tray i.e. 50mm off the ground is required. As some customers prefer a small step between the shower area and the rest of the bathroom floor. The second being If a customer wishes to achieve a level floor system on a screeded floor this can be achieved by sitting the 40mm tray within the screed. You must have sufficient clearance in the floor to achieve this.

These tileable shower bases offer ultimate strength and peace of mind for customers who wish to tile their shower area.

Concept Kit 3 Features:

• Raised Shower Substructure
• Offering Max Showering Space of 1850 x 900mm
• Tileable Surface to Match Bathroom Design
• Convenient Kit Containing All You Need To Install
• Fast Flow Waste with Hair Trap

Concept Kit 3 Specs:

• Tileable Shower Tray - 900 x 900mm
• Tileable Shower Extension Board with Built-In 10mm Fall - 950 x 900mm
• Max Height Before Tiling 50mm
• Shower Tray Substrate - 900 x 900mm
• Product Code: EMKS-05-1809

Included Installation Kit Contents:

• Flexible Waterproof Tape Adhesive
• Wood Floor Primer
• Horizontal Shower Waste
• Board Fixing Adhesive
• Sealing & Mounting Adhesive
• Waterproof Joint Sealing Tape
• Waterproof Internal Corners
• Tile Guide
• Paint Brush
• Notched Trowel
• Protective Gloves

* Note: Trays can easily be reduced in length and width by cutting with a hand saw. We do not recommend cutting more than 50mm off each side of the tray when reducing width. Tray lengths can also be extended by purchasing an additional extension kit.

For more info on how to cut the tray and tray formers please refer to the manufacturer instructions prior to installation or making any cuts.

INSTALLATION INSTRUCTIONS (PDF)