Aquadart Rolla 8 Sliding Door Enclosure - 1600mm

This Rolla 8 Enclosure from Aquadart is a frameless shower enclosure designed to fit in any bathroom or en suite. With no frame and smooth rollers, this Aquadart Sliding Enclosure will open and close effortlessly. Finished with a clear seal, this completes the Aquadart Enclosures frameless look.

Unlike any other sliding door enclosure, the smooth rollers for this door are on the bottom of the glass to give a more modern, minimalistic look. The door for this Shower Enclosure can be installed either left hand or right-hand orientation giving you the freedom to install your Aquadart Shower Enclosure in any space.

Please choose from the 4 side panels from the drop-down section to complete your Aquadart Frameless Shower Enclosure.

This Aquadart Rolla 8 Enclosure is manufactured to use with contemporary slimline trays or wetroom installation.

Installing your new shower in a recess? Then you will need the Aquadart Rolla 8 Sliding Shower Door Recess - 1600mm

Aquadart Rolla 8 Sliding Door Enclosure Spec

• 8mm Toughened Glass
• Adjustments 1565-1585mm
• Aperture 710-730mm
• 2000mm Height
• 1600mm Length
• Power Shower Compatible
• Clean&Clear Glass Protection System
• Clear Seals
• Lifetime Guarantee
• Enclosure Code AQ8945S
• 700mm Side Panel Adjustments: 665-685mm
• 760mm Side Panel Adjustments: 725-745mm
• 800mm Side Panel Adjustments: 765-785mm
• 900mm Side Panel Adjustments: 865-885mm

Do I need a corner post or closing seal?

If you are installing the Rolla8 enclosure where the enclosure is mouted to the wall, and open and closes against the glass side panel, either a corner post or closing seal are optional (only 1 not both). If you wish to install the Rolla8 enclosure to the side panel to allow the door to open and close against a wall, both the corner panel and closing seal are required

Looking to install in a recess or wetroom? See the related products for alternative versions.