Scudo S8 Brushed Brass Complete Walk In Enclosure and 1500mm Tray

The S8 brushed brass walk in shower enclosure kit from Scudo comes with everything you need to fit a high quality walk in shower in your bathroom.

Including walk in shower glass, brushed brass profiles, brushed brass support bars, walkin shower tray and brushed brass waste.

A Choice of shower tray depths are available as well as optional side and flipper panels too.

Scudo S8 Brushed Brass Walk In Enclosure Kit Contents:

• Scudo S8 800mm Wetroom Panel & Brushed Brass Wall Profile*
• Scudo 1500mm Shower Tray (Choice of Depths)
• Brushed Brass Shower Waste Cover*
• Optional End Panel with Brushed Brass Wall Profile
• Optional Flipper Panel with Brushed Brass Profile

Scudo S8 Brushed Brass Glass Specification:

• Made from Toughened Safety Glass
• Acqua Shield Easy Clean Glass Treatment As Standard
• Can Be Installed on a Shower Tray or Tiled Wetroom Floor
• Profile Material: Aluminium
• Glass Height: 2000mm
• Glass Width: 800mm
• Glass Thickness: 8mm
• Adjustment Range: 15-20mm (in wall channel for out of true walls)
• Guarantee: Scudo's Lifetime Guarantee

Shower Tray Specification:

• Brushed Brass 90mm Waste Included*
• Low Profile Modern Sleek Design
• Converts To Easy Plumb If Using Separate Kit - TRAY-FITTING-KITB
• Tray Width: 1500mm
• Tray Depth: Optional - 700/800 or 900mm
• Tray Height: 30mm
• Tray Construction: Stone Resin 
• Waste Position: Side

*The glass is supplied with chrome profiles/waste cover as standard with a brushed brass conversion pack allowing for a complete brushed brass shower enclosure.

Walk In Shower Enclosure FAQs

Do I need an end panel?

If you're installing your walk in shower in a recessed space then the end panel may not be required. If your walk in enclosure is going in a corner then an end panel may be required to help contain any water splashing.

275mm Flipper Panel (Optional)

Flipper panels help to contain and deflect splash back into the shower enclosure. The S8 Flipper Panel is available in 275mm width and can be installed on the end of your wetroom glass to extend the coverage. It can also be angled through 90 degrees to help reduce splashes and allow for easier access.

T Piece Join (Optional)

This would be required if you are fitting a side panel along with the main piece of glass to create an enclosure. Use this to join both support bars supplied to create a T shape support brace.