Wetwall Grey Composite Tile Panel

Wetwall Grey Tile Wall panels give that modern tiled brick wall effect look but at the fraction of the cost and reduce installation time against tiles considerably.

Wetwall Composite Grey Tile Panel

The composite range of shower panels are made from a super strong, completely waterproof composite, that has a stunning embossed tile effect. As the material is of a stronger composition to give a more durable finish, we do advise that fitters use quality saw blades when cutting to size and that you have some spare saw blades to hand in-case they blunt too quickly.

Colour coordinated profiles and trim are now available for the tile effect panels and can be found underneath the main product image or by following this link Composite Trims & Accessories.

Please note: The Composite panels from Wetwall do not come bonded to a plywood or PVC, they are a 3mm composite panel embossed with a tile effect finish. It is recommended they are fitted to a continuous flat surface to help provide support to the panels.

It is imperative that panels are conditioned prior to fitting by laying flat in the room they are to be fitted for 2-3 days.

Most panels exhibiting a small degree of bow or twist can be used and are not faulty. The mechanical method of fixing required should pull the panels flat against the wall. If a slight bow makes it difficult for the panel to sit flush with the fixing surface, we would recommend placing something soft on the panel to protect the finish from scratching and applying pressure to the panel until the adhesive grabs and the panel stays in place. You can also use timber batons to secure the boards in place while the adhesive sets, again while making sure not to damage the decorative surface.

Be sure to follow the installation instructions provided in the link below to ensure your fit is covered by the manufacturers warranty.

Wetwall Composite Installation Guide

Wetwall Grey Tile Wall Panel

• Colour: Grey
• Finish: Gloss
• Material: Solid Grade Laminate
• Application: Bathroom Walls, Feature Walls (internal) and kitchen splashbacks
• Panel Size: 2400 x 1200mm
• Thickness: 3mm
• Edge: Clean Cut
• Orientation: Available in vertical or horzontal as shown below
• Please be aware slight colour variations can occur between other branded panels
• All panels supplied will be from the same batch however slight colour variations can also occurr between panels manufactured on different production runs
• Please specify if pure white is prefered in Comments/Shipping Instructions section of the checkout