Abacus Fix-KST Fixing Adhesive 3.5kg

Ideally suited for adhering shower trays and boards to floors and walls in the bathroom or kitchen.

Fix-KST Fixing Adhesive provides an ideal solution for fixing Abacus Elements boards or tileable shower bases. Given it can be used internally or externally, it has many other uses too.

A single part premixed cementitious dry mortar for the bonding and fixing of elements hard-foam. Fix-KST is rapid setting, frost resistant, waterproof and suitable for bonding on to most common substrates including boarded wooden floors.

• Suitable for Both Internal & External Use
• 3.5kg Bag (approx. 1sqm coverage)
• Setting Time: 3-4 hours (depending on temperature & substrate)
• Conforms to C2FTS1
• Product Code: EMAS-05-0003

Please note: these products are delivered directly by the manufacturer Abacus Bathrooms. During periods of high demand, this item may come in plain packaging.

How to use this Product:

Surface Preparation: Surface Preparation: The surface must be clean, firm, dry, free of dust, dirt, oil and grease. When adhering to timber flooring, ensure the substrate is firm, stable and treated with a suitable primer. All substrates should be rigid enough to withstand loads without deflection.

Mixing & Application: Fix-KST should be added slowly to clean water (3.5kg to approx. 0.7 litre). Do not mix in temperatures less than 5°C. You can either apply using the dot-and-dab method covering approximately 40% of the board up to a bed thickness of 35mm, or by the screeding method using an 8mm comb trowel.