Elements Level Access Wetroom Linear Offset Waste Kit 1600 x 900 x 30mm EMK6-OF-1609

Making a wetroom is easy with the Elemenets range of wet rooms kits by Abacus. This level access wetroom kit gives a level flat floor (with a slight slope to allow water to run to the waste) with no step, perfect for easy access. This kit also features the stylish linear waste.

EMK6-OF-1609 Wetroom Kit Consisting of :

• 1 x 1600 x 900 x 30mm Level Access Shower Base & Offset Linear Waste Stainless Steel
• Linear 600 Offset Drain
• 1 x Tray Installation & Drainage Kit

The Installation & Drainage Kit Includes

• Pro-seal premix 0.5L
• Wood Floor Sealer
• Horizontal Shower Waste
• LinearStainless Steel Cover Plate
• Fix-KST 5kg bag
• Fix-MD 310ml
• 5M Waterproof tape
• 2 x Waterproof Internal Corners
• Tile Guide
• Paint Brush
• Protective Gloves
• Notched Trowel
• Installation Instructions Click Here

For larger Areas Add the Extention Kit

You can also purchase an optional tile finishing trim for the waste by following the link below;

Linear 600 Tile Finishing Trim

The shower tray is 30mm high and is typically recessed into timber floors. The drain must be able to sit between the joists or in a channel on a screeded floor. The waterproof boards are 10mm high.

Constructed from a high quality structural hard foam, the Level Access Wet Room Shower Floor is humidity resistant and has a special mortar coating with a glassfibre reinforcement. It is light, strong and an ideal substrate to tile on to.

NB: We recommend the use of 10mm Elements board on the rest of the floor prior to tiling. This is for waterproofing stability of tiles and insulation.