Aqua Line Easy Wetroom Tray 900 x 900mm

The Jackcoboard Aqua Line Easy linear wet room floor / shower base is an easy to install linear level access ‘walk in shower’ floor tray, with a 300mm drain channel length. This kit comes complete with a 0.6 l/s fast flow drain, stainless steel channel cover, which when reversed is fully tileable to match the surrounding floor.

JACKOBOARD® Aqua shower elements stand out not only due to their functionality – they are also an attractive design element making floor-level showers both practical and aesthetic. This combination is in demand in modern bathroom architecture because the bathroom has long since been more than a functional room and becomes a place to unwind and relax - ideally done in a stylish ambience.

The new channel drain board combines all the properties the bathroom and sanitary industry requires; incorporated fall, high drainage rate of up to 0.6 l/s with a low installation height.  The drain channel is a fixed height of 15mm, suitable for use with 10mm thick tiles. Excellent appearance and availability in different dimensions, shapes and channel lengths. The drain channel remains visible with a classy brushed stainless steel look or the stainless steel bar can be inserted upside down and tiled on the back. Then the channel is no longer visible and disappears completely in the tile covering of the shower floor.

JACKOBOARD^® Aqua Line Easy

• Shower element with brushed stainless steel drain channel
• Drainage rate of up to 0.6 l/s
• Stainless steel bar can be inverted and tiled on the back
• Bar and frame made of stainless steel
• Smooth, easy-clean surface with self-cleaning effect
• Low installation height
• Fixed grate height of 15mm
• Water trap height: 22 mm
• SKU: 4513971
• EAN: 4025345106480

Fully Reversible & Tileable Drain Cover: The upside of the drain cover is a brushed stainless-steel finish, if you prefer to tile the drain cover to match the surrounding floor, simply turn it over. The drain cover is ideal for tiling to match the surrounding floor, with a 12mm depth. 

It can be installed by any person competent in DIY and as the drain trough is already installed into the tray cuts down on install time.

If you have a concrete floor or if there is no access under the flooring to locate the shower drain, then the tray can still be used by using a separate raised substrate.

Notes for laying tiles and boards on JACKOBOARD® Aqua Line easy:

JACKOBOARD® Aqua Line easy is immediately tileable. All types and sizes of tiles can be used in principle. Special care must only be taken when using mosaic tiles less than 25 mm thick. In such cases, we recommend using epoxy resin grout for the tile joints. For full installation details, follow the link below;

Aqua Line Easy Installation Guide - Solid Floors

Aqua Line Easy Fitting Instructions - Suspended Timber Floor

Important:

This tray is 30mm thick, this means that in most circumstances it will sit 10mm above the floorboards when fitted. Therefore, 10mm tile backer board should be used to bring the remainder of the floor up to level prior to tanking and tiling.