Perform Panel Panseal Sealing Strip

Price £19.98 inc. VAT

Code: EXT/WHITE/SEALING/STRIP

Qty

Add to Basket

CLICK TO VIEW LARGER IMAGE

Usually Delivered in 2 to 5 Working Days

Description

Perform Panel Pan Seal Strip

Panseal is a bespoke sealing system that has been specifically designed for HPL (High Pressure Laminate) wall panels. It is the preferred seal of choice by leading HPL Shower wall panel manufacturers such as Perform Panel.

In a climate of fluctuating temperatures, soaps, shampoos & body wash, exposed sealant attracts a dirty bio-slime film that accelerates silicone deterioration leaving an unhygienic eyesore, hassle or a leaking seal causing property damage.

Consists Of:-

1 x Panseal Strips (1850 x 18mm)
End caps not included

Key Benefits:-Durability - The Panseal Strip protects the silicone sealant inside the trim

Flexibility - The incorporation of the pre-applied silicone sealant in the Panseal allows movement between the wall and shower tray/bath
Hygiene - The Panseal strip takes away any shower wash or mucky water from expose silicone, this in turn reduces the risk of mould growth.
Aesthetics - Silicone sealant can become dirty and mouldy over time spoiling the look of your new shower or bathroom wall cladding.

A member of our sales team will call through in the event this item is purchased independently from the panels to confirm acceptance of the additional delivery charge.

Shipping: Can ship only within Mainland United Kingdom

Specification

Product Details

Type

Panel Accessories

Delivery Information

PLEASE NOTE: Perform Panel deliveries are fulfilled direct by the manufacturer and offer a single person delivery to the kerbside only. Please ensure an able-bodied person(s) will be present at time of delivery to assist in taking in the goods.

Panels should always be stored flat and indoors to avoid bowing.

Panels must be thoroughly inspected upon receipt for damage or visible defects. The panels are supplied with a protective clear film to the decorative face, this should be peeled back to check for damage or discrepancies in colour where necessary then replaced to provide protection during commencing installation.

Do not install panels that you find to be defective.

Once the panels or profiles have been cut or installed we regard this as an acceptance of their quality and suitability for purpose and therefore we cannot accept any subsequent claims for faults or damage.

Prior to installation the panels, adhesives and sealants should be conditioned for a minimum of 48‐72 hours in the area in which they are to be installed or an environment of similar temperature or humidity.

Reviews