Scudo S8 Complete Walk In Enclosure And 1600mm Tray

This Complete walk in shower enclosure kit from Scudo comes complete with glass, trims, support bars, walk in shower tray and waste.

A Choice of tray depths are available as well as optional side panels and floor to ceiling support

Scudo Walk In Enclosure Kit Contents:

• Scudo S8 900mm Wetroom Panel & Wall Profile
• Scudo 1600mm Shower Tray (Choice of Depths)
• Optional End Panel
• Optional Flipper Panel

900mm Glass Specification:

• Height 2000mm
• Width 900mm
• 20mm adjustment in wall channel for out of true walls
• 8mm Thick Toughend Safety Glass
• Acqua Shield Glass Treatment As Standard
• Modern Minimalist Support Arm Included
• Can Be Installed Onto A Shower Tray Or Tiled Wetroom Floor
• Scudo's Lifetime Guarantee

Shower Tray Specification:

• 40mm Height
• Stone Resin Construction
• 90mm Waste
• 1600mm Width
• 700/760/800/900mm Depth

Walk In Shower Enclosure FAQs

Do I need an end panel?

If you are installing you walk in shower in a recess and wall to wall, then the end panel is not required. If you walk in enclosure is going in a corner then an end panels would be required to help contain water splash.

Do I need a T Piece?

T pieces are only required when you are selecting an end panel. This is used to join the supports bars from the main glass to the end panel in a T Shape.

Do I need a flipper panel?

Flipper panels help to contain and defelct splash back into the shower enclosure. Flipper panels are optional and its hard to say if you need one as it depending on many factors from the water pressure, the angle of the shower head, how much water splashes off your body and many more factors.