Showerwall HPL Panel Internal Corner Profile

Our Price £20.00 inc. VAT

Price £25.92 inc. VAT

Code: Showerwall Internal Corner

Finish:

You Save £5.92 23%

Qty

Add to Basket

CLICK TO VIEW LARGER IMAGE

Usually Delivered in 2 to 5 Working Days

Description

Showerwall Panel Internal Corner - 2450mm

This fixing bracket from Showerwall is designed to fix Showerwall panels flush into corners, this sits flush against the corner of the wall surface and the panels slot into each side at 90° angle, the Showerwall panels are held in place with adhesive leaving a good looking finish.

90 Deg Internal Corner Trim
Used to mount panels at right angles to each other. Seal with Showerwall sealant.

In order to ensure a watertight finish, profiles/trims are required for the outer edges of the panels as well as both internal and external corners. Five trims are available here dependant on where you would like to fit our panels.

All trims measure in at 2450mm in length and should be sealed using Showerwall sealant.

Showerwall Trims Available In:

Bright Silver
Satin Silver
Gloss White
Black Silk
Antique Gold*

*Quadrant trims are not available in this colour

Please note: This profile/trim is only suitable for Showerwall HPL panels and not the Showerwall Acrylic or Showerwall Acrylic Custom Collection. Trims are not required for Acrylic and Custom panels.

Shipping: Can ship only within Mainland United Kingdom

Specification

Product Details

Type

Panel Accessories

Collection

Showerwall Laminate

Delivery Information

PLEASE NOTE: Showerwall deliveries are fulfilled direct by the manufacturer and offer a single person delivery to the kerbside only. Please ensure an able-bodied person(s) will be present at time of delivery to assist in taking in the goods.

Panels should always be stored flat and indoors to avoid bowing.

Panels must be thoroughly inspected upon receipt for damage or visible defects. The panels are supplied with a protective clear film to the decorative face, this should be peeled back to check for damage or discrepancies in colour where necessary then replaced to provide protection during commencing installation.

Do not install panels that you find to be defective.

Once the panels or profiles have been cut or installed we regard this as an acceptance of their quality and suitability for purpose and therefore we cannot accept any subsequent claims for faults or damage.

Prior to installation the panels, adhesives and sealants should be conditioned for a minimum of 48‐72 hours in the area in which they are to be installed or an environment of similar temperature or humidity.

Reviews