Wilson Art Complete Colour Coordinated Sealant

Price £29.99 inc. VAT

Sealant Colour:

Qty

Add to Basket

Wilson Art Complete Colour Coordinated Sealant

Wetwall_Complete_Colour_Coordinated_Sealant_-_chart.jpg

CLICK TO VIEW LARGER IMAGE

Usually Delivered in 2 to 5 Working Days

Description

Wilson Art Complete Colour Coordinated Sealant

The Wilson Art sealant is specifically designed to be used with the Wetwall Alloy and Elite wall panel collections. Made up of several colour variants, to perfectly pair with the panel you picked. See which colour pairs with which using the second image.

Please Note: This adhesive is not suitable for use with acrylic wall panels.

Wetwall Adhesives & Sealants can only be purchased with free delivery when bought alongside the Wetwall Panels. For orders that do not contain Wetwall panels, a delivery fee will need to be collected prior to dispatching your items.

If you're looking to order this item only, please call the internet sales team to discuss your requirements to ensure there is no delay with your delivery.

Directions for Use:

Use 1 x 290ml cartridge per 2420 x 1200mm panel or 1 every 2 x 580mm or 600mm panels.

Use coloured cartridges for sealing, seaming and jointing and Wilson Art Adhesive to adhere panels to the wall. Use white spirit and a clean wipe to remove excess adhesive. Complete adhesive generally provides sufficient grab but occasionally panels may need to be braced temporarily until the adhesive cures.

Shipping: Can ship only within Mainland United Kingdom

Specification

Product Details

Type

Panel Accessories

Collection

Wetwall Alloy

Delivery Information

PLEASE NOTE: Mermaid deliveries are fulfilled direct by the manufacturer and offer a single person delivery to the kerbside only. Please ensure an able-bodied person(s) will be present at time of delivery to assist in taking in the goods.

Panels should always be stored flat and indoors to avoid bowing.

Panels must be thoroughly inspected upon receipt for damage or visible defects. The panels are supplied with a protective clear film to the decorative face, this should be peeled back to check for damage or discrepancies in colour where necessary then replaced to provide protection during commencing installation.

Do not install panels that you find to be defective.

Once the panels or profiles have been cut or installed we regard this as an acceptance of their quality and suitability for purpose and therefore we cannot accept any subsequent claims for faults or damage.

Prior to installation the panels, adhesives and sealants should be conditioned for a minimum of 48‐72 hours in the area in which they are to be installed or an environment of similar temperature or humidity.

Reviews