Showerwall Compact End Cap U Profile

Price £24.00 inc. VAT

Code: Showerwall Compact End Cap

Finish:

Add to Basket

CLICK TO VIEW LARGER IMAGE

Out Of Stock - Please See Alternatives

Description

Showerwall Compact End Caps - 2450mm

The Showerwall Compact End Cap profiles are designed to give a neat professional finish at the end of the 3mm Showerwall Compact panels.

Easy to fit, they simply sit flat against the edge of the wall the panels are to be adhered to. Each 3mm panel slots neatly into the end cap and is held in place with a small amount of sealant. Leaving you with a professional, clean looking finish.

In order to ensure a watertight finish, profiles/trims are required for the outer edges of the panels as well as both internal and external corners. All trims measure in at 2450mm in length and should be sealed using Showerwall sealant.

Showerwall Compact Trims available in:

Polished Silver
Satin Silver
White
Black

Shipping: Can ship only within Mainland United Kingdom

Specification

Product Details

Type

Panel Accessories

Collection

Showerwall Compact

Delivery Information

PLEASE NOTE: Showerwall deliveries are fulfilled direct by the manufacturer and offer a single person delivery to the kerbside only. Please ensure an able-bodied person(s) will be present at time of delivery to assist in taking in the goods.

Panels should always be stored flat and indoors to avoid bowing.

Panels must be thoroughly inspected upon receipt for damage or visible defects. The panels are supplied with a protective clear film to the decorative face, this should be peeled back to check for damage or discrepancies in colour where necessary then replaced to provide protection during commencing installation.

Do not install panels that you find to be defective.

Once the panels or profiles have been cut or installed we regard this as an acceptance of their quality and suitability for purpose and therefore we cannot accept any subsequent claims for faults or damage.

Prior to installation the panels, adhesives and sealants should be conditioned for a minimum of 48‐72 hours in the area in which they are to be installed or an environment of similar temperature or humidity.

Reviews