10mm Grey Concrete Matt SPL17 PVC Splashpanel Wall Board Panel Style

These panels are 100% waterproof which makes them perfect for shower enclosures, bath surrounds, wetrooms or even around the kitchen sink.

Whether you are tradesman or a DIYer this is an easy product to install, with it being easy to cut and with the ability to be applied over the top of existing tiling. Simply cut your panels down to the required size then bond to a flat subsurface or to a timber batten frame.

Please be aware: The 1000mm wide panels and 1200mm wide panels use a different tongue & groove system and as such can not be joined together without the use of a H Profile. If you wish to run panels in sequence using the tongue and groove element, you will need to purchase boards of the same dimension. 

 Features

• Stain & Mould Resistant
• Hygenic & Easy To Clean
• 100% Waterproof
• Tongue and Grooved
• Suitable for Wet or Dry Areas
• Cost Effective

Specification

• Height: 2400mm
• Thickness: 10mm
• Finish: Matt (Rough Surface)
• Code: SPL17
• Material: PVC with a Cellular Structure
• Fire Rating: BS EN 13501-1:2007 achieving an F.R classification of C, s3, d32
• Domestic Guarantee: 5 Years
• Commercial Guarantee 5 Years

It is always recommended to request samples prior to ordering your panels as some colour variations can look different when in natural light compared to when displayed on screen. Samples are available directly from the manufactuers website here.